Nova-tech Pulsafeeder 5-Function Degass Valve Bedienungsanleitung PDF herunterladen

5-FUNCTION/DEGAS VALVE

INSTALLATION OPERATION MAINTENANCE INSTRUCTIONS

INSTALLATION:

1. Tubing Version: Remove the tubing nut from the discharge valve cartridge on the top of the

pump head. Install the supplied Viton O-ring (#L1501200-VTN)* into the groove around the

tubing tip on the valve cartridge. Hand tighten the 5-Function Valve onto the discharge valve

of the pump. Connect the discharge tubing to the “OUTLET” port and the bypass tubing to the

“RETURN” port of the 5-Function Valve.

**PRESOAK TUBE: Prior to assembly soak tube end in 180°F to Boiling Water (approx.

the water temperature from the discharge of an office coffee maker). Soak time should be

a minimum of 30 seconds.

2. NPT Version: Apply plumbers tape or sealant to the threads of the 5-Function Valve. Screw

“INLET” connection into the discharge valve of the pump head. Connect piping to the

“OUTLET” and “RETURN” port connections of the 5-Function Valve.

*If Viton is not compatible with fluid being pumped and alternate Teflon O-Ring is available

(L1501200-TFE). Viton is the preferred sealing material with difficult to seal fluids like Sodium

Hypochlorite and similar

Page 1 of 4

1 2 3 4

5-FUNCTION/DEGAS VALVE INSTALLATION OPERATION MAINTENANCE INSTRUCTIONS INSTALLATION: 1. Tubing Version: Re

Seite 2

5-FUNCTION/DEGAS VALVE OPERATIONS: 1. Degas Function: Designed to bypass gases and fluid during normal pump operation. The bypass feature all

Seite 3

5-FUNCTION/DEGAS VALVE SPECIFICATIONS: Material of construction: Valve body:….Polyvinylidene Fluoride(PVDF), :…..Polyvinyl Chlorid

121022259SECTION "A-A"3813"A""A"ON OFFA B1112151451241876201617211022 1. DEGASS RELIEF 2. BACK PRESSURE 3. ANTI-SY

Keine Kommentare

Nova-tech Pulsafeeder 5-Function Degass Valve Bedienungsanleitung